LST AO-58000-600 specifications Optical Smoke Detector, Sensitivity selectable in 5 steps

Optical Smoke Detector

AO-58000-600

•ADM loop technology with Apollo/Discovery protocol

•Sensitivity selectable in 5 steps

•Optional connection of remote indicator

•Constant response sensitivity

•Sealed electronics

Description

The addressable Optical Smoke Detector AO-58000- 600 uses the scattered light principle and was deve- loped for the detection of smoke particles in a wide range of fi re detection applications. The modern design of the sensing chamber allows to reliably evaluate the characteristics of fi re.

The response sensitivity of the detector can be adjus- ted in 5 steps between 1.4%/m and 2.8%/m, via the fi re detection control panel.

The proven ADM loop technology with Apollo/Discovery protocol establishes a permanent communication bet- ween the fi re detection control panel and the detector. That ensures a periodical function testing of the detec- tor. In the control panel all types of fi res are detected by continuously comparing fi re patterns.

The infl uence of contamination of the optical measure- ment system is compensated for by using intelligent evaluation algorithms. With that, the response sensiti- vity of the detector is kept constant for a long time – a further effective step to avoid false alarms.

The two LEDs with 360° visibility indicate the activated condition of the detector. The detector address is se- lected by means of a code card in the detector base. Therefore the detector can be changed without additi- onal tools.

The detector can be attached to various bases and it can be protected against theft.

Specifications

Operating voltage	Supply through loop voltage
Current consumption	typ. 400µA (quiescent)
Ambient temperature	-20°C to +60°C (no condensation or icing)
Relative humidity	0 – 95% (no condensation)
Dimensions ø × H	100 × 42 (mm)
Colour	white
Weight	105g
Approval	VdS G299037
Order number	241027
Order name	Optical Smoke Detector/Anal./Disc/Apo AO-58000-600
Building Safety. Building Security.	A

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27	AO-58000-600_DBL_LST_EN_0804.PDF • PAGE 1
OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED