LST ENM2-1 specifications Ethernet Module, Serial data cable included, Description, Specifications

Ethernet Module

ENM2-1

•Remote setup and maintenance of Fire Detection Control Panels Series BC216 and BC016

•Module setup via configuration software ConfigENM2

•Power supply through fire detection control panel possible

•Serial data cable included

Description

The Ethernet Module ENM2-1 is connected to the Serial Interface Module SIM216-1 of a Fire Detection Control Panel Series BC216 or BC016 and converts the com- munication between the control panel and a PC into the IP protocol. That allows the parameterisation software PARSOFT to establish an easy remote access to the Fire Detection Control Panels Series BC216 and BC016 for the purpose of setup and maintenance.

The system administrator of the customer LAN integra- tes the Ethernet Module ENM2-1 into the customer LAN

like any other device, e.g., PC or network printer.

The Ethernet Module ENM2-1 is set via the confi gu- ration software Confi gENM2, which can be found on the CD-ROM containing the parameterisation software

PARSOFT.

The remote PARSOFT PC contacts the ethernet module via the set IP address. The operation of PARSOFT is the same for local access and for remote access.

Specifications

Operating voltage	21 – 30VDC
Current consumption at 24V	45mA
Ambient temperature	+5°C to +50°C
Relative humidity	max. 95% (no condensation)
Dimensions W × H × D	100 × 90 × 25 (mm)
Weight	150g
Order number	223025
Order name	Ethernet Module ENM2-1

Building Safety. Building Security.

A

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27	ENM2-1_DBL_LST_EN_0804.PDF • PAGE 1
OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED