LST IBSST-DR-P02, IBSST-DR-P01 specifications Description, Specifications, Sounder/Strobe

Sounder/Strobe

IBSST-DR-P01, IBSST-DR-P02

•ADM loop technology with System Sensor/200 protocol

•Can be activated with two different tone types, 32 tone types selectable

•Sound level selectable in three steps

– up to 95dB(A)

•Low power consumption

•Versions with or without integrated dual-isolator available

•Two base types available – IP24, IP44

Description

The loop powered sounder with strobe is fi tted into a round, red plastic case. It is powered and actuated as a module via the ADM loop with System Sensor/200 protocol. Fire Detectors Series 200 can be fi tted into the integrated base.

The sounder can be activated by a Fire Detection Con- trol Panel Series BC216 with two different tone types, depending on the parameter setup. One of 32 different tone type combinations can be selected with a DIL- switch. The following tones are available, for example:

•Continuous tone 660Hz,

•Emergency signal according to DIN 33404,

•Slow whoop tone according to NEN 2575,

•Alternating tone 800/970Hz, and many more.

The sound level can be selected in 3 steps. The stro- be is always activated together with the sounder. The address of the sounder/strobe is selected with two decadic rotary switches located at the bottom of the device.

The device is designed for indoor surface mounting. For this purpose a special base is needed. Two diffe- rent base types for protection classes IP24 or IP44 are available, depending on the application. An optional mounting plate can be supplied for surface mounted cabling.

The sounder/strobe is available in two different versi- ons: With or without integrated dual-isolator module.

Specifications

Operating voltage	Supply through loop voltage
Sound level (detector installed)	typ. 70dB(A) at 1m distance (low)
	typ. 79dB(A) at 1m distance (medium)
	typ. 87dB(A) at 1m distance (high)
	max. 95dB(A) at 1m distance (high)
Flash frequency	1Hz
Ambient temperature	-25°C to +70°C
Dimensions ø × H	112 × 42 (mm) (without detector, incl. base LPBW)
Weight	136g
Colour	red / cream, RAL 9001

Building Safety. Building Security.

A

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27	IBSST-DR-P0x_DBL_LST_EN_0804.PDF • PAGE 1
OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED