LST specifications Relay Modules, RL58-1/RL58-2, Description, Specifications

Relay Modules

RL58-1/RL58-2

•8 or 4 relay outputs, respectively, with one dry changeover contact each

•Actuation display by LED for each output

•Switch contacts on terminals

•Easy mounting on componentry carrier

•Connection with control panel via flat cable

Description

The fi re detection control panels Series BC216 and BC016, respectively, provide 16 freely programmable open-collector control outputs. Eight of these outputs are connected to a fl at cable connector. The Relay Mo- dules RL58-1 and RL58-2 allow for the easy conversion of these control outputs to dry changeover contacts. The componentry is connected to the fi re detection con- trol panel via a fl at cable.

The RL58-1 provides eight relay outputs with a maxi- mum contact rating of 30W. The current is limited to 1A and the voltage is limited to 60VDC. The RL58-2 offers four relay outputs with a maximum of 5A/230VAC. The terminal of the RL58-2 are designed for mains voltage. Two relay modules RL58-2 are each cascadable via pin connectors. The relay module is delivered with fl at ca- ble and mounting accessories for easy installation.

Specifications

Operating voltage	20 – 31VDC
Current consumption at 24V	typ. 22mA per activated circuit
Control current	typ. 1.2mA per input
Ambient temperature	-5°C to +50°C
RL58-1
Switching power per contact	1A/60V/30W
Contact life	approx. 5 mill. switching cycles (unloaded)
	approx. 300,000 switching cycles (at 24VDC/1A)
Dimensions L × W × H	85 × 65 × 37 (mm)
Weight	330g
Part No.	222004
Order name	Relay Module 8-Fold/60VDC RL58-1

Building Safety. Building Security.

A

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27	RL58_DBL_LST_EN_0804.PDF • PAGE 1
OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED