•Do not fill fuel tank while engine is running.

•Avoid spilling fuel or oil. Wipe up fuel spills before starting engine.

•Move at least 10 feet (3 meters) away from fuel and fueling site be- fore starting engine.

•Always store gasoline in a container approved for flammable liquids.

ELECTRICAL SAFETY (for electric powerheads)

Ai_ WARNING: Avoid a dangerous environment. To reduce the risk of electrical shock, do not use in rain, in damp or wet locations, or around swimming pools, hot tubs, etc. Do not expose to snow, rain, or water to avoid the possibility of electrical shock. Do

not handle extension cord plug or unit with wet hands.

•Use only a voltage supply as shown on the nameplate of the powerhead.

•Avoid dangerous situations. Do not use in presence of flammable liquids or gases to avoid creating a fire or ex- plosion and/or causing damage to unit.

•Avoid dangerous environments. Do not use in unventilated areas or where

dust or explosive vapors can build up

•To reduce the risk of electrical shock, use extension cords specifically marked as suitable for outdoor ap- pliances. The electrical rating of the

cord must not be less than the rating of the unit. The cord must be marked

with the suffix "W-A"(in Canada,

"W"). Make sure your extension cord is in good condition. Inspect exten- sion cord before use and replace if damaged. An undersized extension cord will cause a drop in line voltage resulting in loss of power and over- heating. If in doubt, use the next heavier gauge. The smaller the gauge number, the heavier the cord.

•Do not use multiple cords.

•The powerhead may have a polarized plug (one blade is wider than the oth- er); if so, it will require the use of a po- larized extension cord. The appliance plug will fit into a polarized extension cord only one way. If the plug does not fit fully into the extension cord, re- verse the plug. If the plug still does not fit, obtain a correct polarized exten- sion cord. A polarized extension cord will require the use of a polarized wall outlet. This plug will fit into the polar-

-3-

ized wall outlet only one way. If plug does not fit fully into the wall outlet, re- verse the plug. If it still does not fit, contact a qualified electrician to install the proper wall outlet. Do not change the equipment plug, extension cord receptacle, or extension cord plug in any way.

•Do not attempt to repair unit. Inspect the insulation and connectors on the

powerhead and extension cord before each use. If there is any damage, do not use until damage is repaired by your Sears Service Center.

•Do not pull or carry by cord; do not use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Keep cord away from heated surfaces. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

•Do not use the powerhead if the switch does not turn the unit on and

off properly. Have the unit repaired by your Sears Service Center.

•Keep the extension cord clear of oper- ator and obstacles at all times. Do not

expose cords to heat, oil, water, or sharp edges.

•Avoid any body contact with any grounded conductor, such as metal fences, or pipes, to avoid the possibil-

ity of electric shock. Don't handle plug or unit with wet hands.

•Do not use with damaged cord or plug. If powerhead is not working as it should, has been dropped, dam- aged, left outdoors, or dropped into water, return it to your Sears Service Center for repair.

•Ground Fault Circuit Interrupter (GFCI) protection should be provided on the circuit or outlet to be used for

the powerhead. Receptacles are available having built-in GFCI protec- tion and may be used for this mea- sure of safety.

DOUBLE INSULATION

CONSTRUCTION

Your powerhead should be double in-

sulated to help protect against electric shock. Double insulation construction

consists of two separate "layers" of electrical insulation instead of ground- ing. Tools and appliances built with a double insulation system are not in- tended to be grounded.Safety precau- tions must be observed when operat- ing any electrical tool. The double in-

Page 2 Page 4
Page 3
Image 3
Craftsman 358.792421 manual Electrical Safety for electric powerheads, Double Insulation Construction
Page 2 Page 4

358.792421 specifications

The Craftsman 358.792421 is a versatile gas-powered string trimmer designed for both residential and commercial gardening tasks. Known for its robust performance and user-friendly design, this trimmer is ideal for maintaining a neat and tidy lawn, edges, and garden beds.

At the heart of the Craftsman 358.792421 is a powerful 25cc 2-cycle engine. This engine provides ample power to tackle thick grass and weeds while remaining lightweight enough for extended use without fatigue. The two-cycle technology allows for less weight than four-cycle alternatives, making it easier to maneuver in tight spaces or around delicate plants.

One of the standout features of the Craftsman 358.792421 is its easy start technology. The engine is designed to provide a quick and reliable start with minimal effort, eliminating the frustration often associated with starting gas-powered equipment. This feature ensures that users can get to work without delays, making it particularly beneficial during busy gardening seasons.

The trimmer's design incorporates a 17-inch cutting width, allowing users to cover more ground with fewer passes. This feature is especially useful for larger yards or properties, significantly reducing the time and effort required to complete edging and trimming tasks. The bump feed line advancement system simplifies the process of replacing the cutting line; users can easily tap the head on the ground to release more line without interrupting their work.

Ergonomics play a vital role in the design of the Craftsman 358.792421. It features an adjustable handle, enabling users to customize the height and angle for maximum comfort and control. The lightweight construction further enhances usability, reducing strain during prolonged trimming sessions.

Additionally, this model incorporates a protective guard designed to shield users from debris while trimming. The guard is strategically placed to keep cuttings from scattering too far, allowing for a more controlled and tidy workspace.

Durability is also a key consideration in the Craftsman 358.792421, featuring quality materials that withstand the rigors of regular use. The trimmer is built to handle the demands of various lawn care tasks, ensuring it remains a reliable tool in any gardener's arsenal.

In summary, the Craftsman 358.792421 proves to be a formidable choice for anyone seeking a powerful, efficient, and easy-to-use gas string trimmer. With its dependable engine, user-friendly features, and ergonomic design, it is well-suited for tackling everything from routine yard maintenance to more extensive landscaping projects. This trimmer combines practicality with performance, making it an essential tool for achieving beautifully manicured outdoor spaces.
Top Page Image Contents