OPERATING THE COUPLER
Your powerhead is equipped with a coupler which enables optional attach- ments to be installed. The optional at- tachments are:
Edger ...............358.792403
Cultivator ............ 358.792410
Brushcutter .......... 358.792443
Pruner ..............358.792450
WARNING: Always disconnect
powerhead spark plug (or disconnect powerhead from power source) before removing or installing attachments.
REMOVING ATTACHMENT
CAUTION: When removing or instal- ling attachments, place tile unit on a flat surface for stability.
1.Loosen the coupler by turning the knob counterclockwise.
Upper Shaft
Coupler
Coupler Primary Hole
Guide Recess
Upper Locking/ Attachment
Shaft Release
Button
_I, WARNING: Make sure the lock-
ing/release button is locked in the pri- mary hole and the knob is securely tightened before operating the unit. Us- ing the wrong hole could lead to serious injury or damage to the unit.
Lower \
Attachment
TIGHTENKnob
2.Press and hold the locking/release button.
Locking/Release
Button
Locking/Release
Button in Primary Hole
INSTALLING ATTACHMENT
HANGER
An attachment hanger is provided for storage when attachment is not in use. To install hanger on attachment:
1.Remove the shaft cap from the at- tachment (if present) and discard.
2.Press and hold the locking/release button.
3.Push hanger onto the attachment until the locking/release button snaps into the hole.
/
Attachment
Upper Shaft
OPERATING POSITION
ALWAYS WEAR:
3.While securely holding the upper shaft, pull the attachment straight out of the coupler.
INSTALLING ATTACHMENT
1.Remove the shaft cap from the at- tachment (if present) and discard.
2.Position locking/release button of attachment into guide recess of up- per shaft coupler.
3.Push the attachment into the cou-
pler until the locking/release button snaps into the primary hole.
4.Before using the unit, tighten the knob securely by turning clock- wise.
Eye Protection
_lJ WARNING: Inspect the area be- fore using the unit. Remove all debris and hard objects such as rocks, glass, wire, etc., that can ricochet, be thrown,
or otherwise cause injury or damage during operation.