LST WMSTR-WR-P01 specifications Description, Specifications, Building Safety. Building Security

Strobe

WMSTR-WR-P01, WMSTR-WR-P02

•ADM loop technology with System Sensor/200 protocol

•Long lifetime of strobe due to the use of LEDs

•Low power consumption

•Versions with or without integrated dual-isolator available

•Various base types available – IP24, IP44, IP65

Description

The loop powered strobe is fi tted into a round, red plas- tic case. It is powered and actuated as a module via the ADM loop with System Sensor/200 protocol.

The address of the strobe is selected with two decadic rotary switches located at the bottom of the device.

The strobe is designed for indoor or outdoor wall moun-

ting. For this purpose a special base is needed. Various base types for protection classes IP24, IP44 or IP65 are available, depending on the application. An optional mounting plate can be supplied for surface mounted cabling.

The strobe is available in two different versions: With or without integrated dual-isolator module.

Specifications

Operating voltage	Supply through loop voltage
Flash frequency	1Hz
Ambient temperature	-25°C to +70°C
Dimensions ø × H	112 × 37 (mm) (incl. base LPBW)
Weight	80g
Colour	red

Building Safety. Building Security.

A

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27	WMSTR-WR-P0x_DBL_LST_EN_0804.PDF • PAGE 1
OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED