x 4 T E M P E R A T U R E
To program P2 and P3, press button (2) and proceed in the same manner as described for P1. In order to deactivate the programming, the CLOCK TIME must be visible on the display. Press button (3). Select the programme that you wish to deactivate and then press button (4). The display will now show the programmed clock time. The word ‘PROGRAM’ will disappear.
x 4 E X T R A C T I O N T I M E
Programming the extraction time (C1,C2)
If you press button (3) once, you will obtain a NORMAL espresso. Coffee preparation will take approximately 15 seconds (C1).
Programming the temperature for coffee preparation
The X4 has been set to a standard temperature of 98° C for coffee preparation. You can verify the set temperature by pressing button (4).
You can also change the temperature for coffee preparation to your own requirements. To change the temperature, depress button
(2) for approximately 3 seconds.
Next, continue pressing the button until the flashing temperature display for coffee preparation appears. Now, press button (3) or
(4) to change the temperature.
The programmable temperature range is between 80° and 103° Celsius.
Press button (2) to save this value.
If you press the same button twice in succession, you will obtain a long espresso. Coffee preparation will take approximately 25 seconds (C2).
You can also change the duration of coffee extraction to suit your own requirements. To be able to make this change, the TEMPERATURE must be shown on the display. If the temperature is not shown on the display, press button (2). Put coffee in the
3 sec.
3 sec. 
Start the extraction of the coffee while holding
+ - in button (3) until the desired amount of coffee is in the cup, than release the button. After preparation, the machine will save the respective time duration.
You can also change the C2 time using the same procedure.
28 | 29 |
