Lucent Technologies 4424D+, 4406D+ Programming and Feature Codes, Call Handling Features, Drop

Programming and Feature Codes

Call Handling Features
Call Waiting When Call Waiting is turned on at an extension and you are
	already on a call, you hear one tone for inside calls or two tones
	for outside calls when a second call arrives at that extension.
	To turn on Call Waiting at your extension: lift the handset and
	press	1	1 .
	To turn off Call Waiting at your extension: lift the handset and
	press		1 1 .
	To pick up a Call Waiting call: hang up and the waiting call rings,
	or press	Feature (or # )+ 8		7 .
Camp-On	Camp-On allows you to complete a transfer to a busy extension.
	The call is put on hold until the extension can receive a call; then
	it rings automatically and you hear a priority ring (1 long ring and
	3 short rings).
	To use with the feature code:			To program onto a button:
	Feature	(or	# )+ 5 7 .	EXT + lift handset +		#	0	0
				+ Camp-On +		5	7	+
				#	0 0 .
Drop	You must program a Drop button onto a button. Use					Drop to
	drop a participant from a conference call.

The display shows 4400-Drop.

	To program a Drop button:		EXT + lift handset + #		0	0 +
	Drop +	7 8 7 +	#	0 0 .
HFAI	To use Hands-Free Answer Intercom (HFAI), you must program
	an HFAI button onto a button. When you press HFAI				, you can
	talk to a person who calls you on an intercom call without lifting
	the receiver.
	To program an HFAI button: EXT			+ lift handset + HFAI		+
	# 0 0 +	7 7 9 + #		0 0 .