Routing commands
The following main menu commands are displayed for routing mode:
xdsl* | - entry to xdsl menu |
default | - set all configuration to factory setting |
dnsrelay | - entry to DNS Relay menu |
ipoa | - entry to IPoA menu |
lan | - entry to Ethernet |
list | - list status for enabled PVC |
manage | - entry to management menu |
mode | - exit this menu and change modem mode |
pat | - entry to PAT menu |
ping | - ping IP for testing purpose |
pppoa | - entry to PPPoA menu |
quick | - quick setup |
r1483 | - entry to RFC 1483 menu |
restart | - reboot modem |
rtable | - entry to Routing Table menu |
save | - save and restart modem |
show | - display configuration of PVC and Ethernet |
ver | - display software version |
Note: *The WAN interface displayed in the menu is dependent on the interface supported by your unit. This generic form of presentation has been arrived at to eliminate the need of representing every interface.
Most of the routing commands are similar to those under bridging mode. Table
Table 3-2. Additional main-menu and second-level routing commands
Main menu | ||
|
|
|
dnsrelay | setdnsip | - set DNS server IP |
| show | - show DNS Relay configuration |
|
|
|
CellPipe™ 20 Series User’s Guide |
