8.Raise the upholstered back to vertical position. Tuck the plastic skirt at rear of upholstered back behind seat frame crossbrace. Align the hinges at the bottom of the gas springs with the holes in the U-brackets on the seat frame crossbrace. While holding the back in position with one hand, secure both gas spring hinges to the U-brackets by placing two 5/16"diameter clevis pins through the U-brackets and hinges with the other hand.

9.Secure the clevis pins by placing the ring cotter pins through the hole in the clevis pins as shown at right.

Place Clevis Pins

Place Cotter Pins

10.Replace side panels:

Insert side panel into recliner frame by locating the tabs underneath the armrest. Make sure side panel is properly aligned and that the top edge is behind the locking tabs. Press side panel into frame sides. Make sure that both push buttons are protruding into side panel to ensure side panel is locked in place.

panel tabs side panel

push button

Replace Side Panel

FR587W-INS-LAB-RevC13: Deluxe Extra-Wide Clinical Care Recliner Assembly and Operating Instructions

7

Page 7
Image 7
Lumex Syatems FR587WH operating instructions Place Clevis Pins Place Cotter Pins