Memory Recall
•You can recall stored data by pressing the “Memory Recall” switch at any time, EXCEPT while taking a measurement.
•Up to 42 sets of measurement results can be stored in memory. Memory cell No. 1 is always used to store the newest set of results.
•When pressing the “Memory Recall” switch, the memory cell number is displayed. The stored measurement results (systolic/diastolic blood pres- sure) are then displayed. The display will show the memorized pressure and pulse value switching
back and forth.
•If the “Memory Recall” switch is pressed again, the prior measurements are displayed in the order they were taken.
Memory Clear Function
You may erase one or all records in the memory.
•Press and release MEMORY key to choose the record that you wish to delete.
•Press and hold the ON/OFF key until the display shows dEL.
•Delete one record: Press and release the power key. After three beeps are heard, the record is completely deleted.
•Delete all records:
1.Press and release the MEMORY key then the display shows dEL ALL.
2.Press and release the ON/OFF key. After three beeps are heard, the unit erases all records.
3.Remove one or both batteries while the unit is on.
8
