Spyra Bar Stool
Part # BS-SPYRA
CHARGE | I |
| |
UP/DOWN |
|
SPEED |
|
ON/OFF |
|
HOLD |
|
Instructions |
|
Assembly |
|
1.Remove protective cap from Hydraulic pole (G).
2.Insert Hydraulic pole (G) into Base (H).
3.Place Metal pole (E) over Hydraulic pole (G).
4.Insert LED Mechanism (D) into Metal Pole (E).
5.Place Seat (A) over LED Mechanism (D) and Metal pole (E) .
6.Secure by placing Screws (B) and Washers (C) into Seat (A). Fasten Screws (B) and Bolts (F).
7.Carefully sit on Seat (A) to secure.
Operation
1.Charge internal battery using Adaptor (I).
NOTE: Bar stool MUST be turned off charge.2.Push SPEED button to regulate color phasing.
3.Push ON/OFF button to turn LEDs on and off.
4.Push HOLD button to pause LEDs on specific colors.
3.Adjust height using lever.
Assembly Instructions
Instrucciones De Asamblea
Instructions d’Assemblée
December 2010
A
B
C
D
E
F
Part List
1Seat with backrest (A)
4Screws (B)
4Washers (C)
1LED Mechanism (D)
1Metal pole with footrest (E)
4Bolts (F)
1Hydraulic pole (G)
1Base (H)
1Adapter (I)
ATTENTION:
This cap must be removed prior to assembly!
G
H
