headphone jack

BASIC SET UP

Step 1: Connect the two Unit Connector Cords (6).

Step 2: Plug in provided adapter (5) as pictured.*

Step 3: Connect to audio source using one of the connection methods described in this manual.

Step 4: Connect microphone cord if needed. Plug in 1 or 2 microphones to sing along.**

BACK PANEL

Step 1

Step 2

(ADAPTER)

*CAUTION: Use ONLY provided adaptor! Different voltage may cause permanent damage.

**CAUTION: DO NOT place microphone directly in front of speakers. Feedback will occur.

NOTE: Gaming microphones with USB connections must be connected directly to their respective game consoles. The Rock Show™ mic. is not programmed to control elements of the game.

CONNECTING TO PORTABLE AUDIO / VIDEO DEVICES

Step 1: Connect the Red/White ends of RCA to MINI cord (8) into AUDIO IN of Rock Show™.

Step 2: Plug the single end of the RCA cord (8) into the headphone jack of your device.

Step 3: Turn Rock Show™ on by turning Volume knob clockwise.

Step 4: Turn on portable device and turn up the volume.

Step 5: (optional) Plug in 1 or 2 microphones to sing along.

BACK PANEL

(ADAPTER)

iPod® *

MP3 Player

Portable Audio Device PSP® or Nintendo DS® Computer

Portable Game Device

*Note: Some Apple™ devices such as iPhone™ or iTouch™ require special 1/8 in. (3.5 mm) TTY adapter (sold separately)

4

Page 4
Image 4
LumiSource Electronic Keyboard owner manual Basic SET UP, Connecting to Portable Audio / Video Devices