DAISY CHAINING CHAIRS TOGETHER
DIRECT CONNECTION | FIRST CHAIR: Connected to device | SECOND CHAIR |
|
Step 1: Connect BoomChair™to any media device as described on pages 4 or 5. This is the first chair.
Step 2: Connect one end of RCA cord (3b) into RCA OUTPUT (G) of first BoomChair.™
Step 3: Connect other end of RCA cord (3b) into RCA INPUT (H) of second BoomChair.™
Step 4: Turn all Boomchairs™ on by turning Power knob
(C) clockwise.
Repeat steps 2 and 3 from second chair to connect more BoomChairs.™
Up to 4 chairs can be connected when not using the wireless feature.
Media Device
BASS/TREBLE | VOLUME | 3b | BASS/TREBLE | VOLUME | ||
| + | + |
|
| + | + |
|
| POWER |
|
|
| POWER |
INPUT | OUTPUT | 0 3 2 1 |
| INPUT | OUTPUT | 0 3 2 1 |
R | R |
|
| R | R |
|
L | L | L | L |
WIRELESS CONNECTION
Up to 8 chairs can be connected using the wireless method. This requires only one transmitter and all chairs switched to wireless mode.
Step 1: Connect Boomchair to any device using the wireless methods described on pages 4 or 5.
Step 2: Set transmitter and all Boomchair™ channel switches (E) to matching frequency.
Step 3: Turn all Boomchairs™ on by turning Power knob (C) clockwise.
WIRELESS CONNECTION TIPS
Should interference occur, switch the channel on the wireless transmitter using the top slider bar (Fig. 1).
Switch the channel selector on the Boomchair™ (Fig. 2) to the same channel as the transmitter. The number corresponds to the number of dots on the transmitter. Select “0” for non- wireless connections.
Make sure all cables are securely connected.
Fig. 3
Make sure batteries are correctly installed in the transmitter, and that the power is on, as indicated by the red LED (Fig. 3).
If you experience static or poor reception from your wireless connection, you may need to select the direct connection method to ensure the best possible sound quality. See page 5.
6
Fig. 2
0 3 2 1
Fig. 1
Power Switch
WARNING:
DO NOT use the adapter for the chair with this transmitter. It will permanently damage the transmitter and void your warranty. Use only 9V - 12V DC, 100 mA - 500 mA adapter, or visit www.BoomChair.com to order the proper adapter.
