Lyngdorf Audio SDA 2175 owner manual Protection, Mains, Trigger, Mechanical, Parameter, Value

Protection

Parameter	Value	Note
Grounding	Mains earth, chassis and audio
	ground are connected
	internally.
Output short circuit current	±40 A
Output DC voltage	±5 V @ <0.1 Hz
Over-temperature	All heatsinks and mains
	transformer

Mains

Parameter	Value	Note
Mains input connector	IEC 320 cold type	Mains lead supplied
Mains voltage range	100-120 VAC, 50–6 0Hz	115 V version
Mains voltage range	200-240V AC, 50-60Hz	230 V version
Internal mains fuse	8 Amp	115 V version
Internal mains fuse	4 Amp	230 V version
Power consumption	1.5 W	STANDBY mode
Power consumption	35 W	OPERATE mode, no output.
Power consumption	116 W	2 x 37.5 W/4 Ohms
Power consumption	820 W	2 x 300 W/4 Ohms.

Trigger

Parameter	Value	Note
TRIGGER IN connector	3.5 mm (1/8") mono jack	Case=Gnd, Tip=Input
TRIGGER BYPASS connector	3.5 mm (1/8") mono jack	Case=Gnd, Tip=Output
TRIGGER IN impedance	10 Kohm
TRIGGER IN sensitivity	4 VDC or 4Vp AC	Positive DC voltage on Tip. AC
		> 50 Hz
Max. input voltage	±25 Vp

Mechanical

Parameter	Value	Note
Width	450 mm (17.72")
Depth	340 mm (13.39")	Excluding loudspeaker
		connectors.
Depth	361 mm (14.21")	Including loudspeaker
		connectors.
Height	88.8 mm (3.5")	Excluding feet.
Height	100.6 mm (3.96")	Including feet.
Net weight	15.5 kg (34 lb.)
Shipping weight	17.5 kg (39 lb.)
	11