LT
AMP
RT
Figure 2
5.The MNCS system may be connected two ways depending on the amplifier used with the system. The major difference is the subwoofer connections.
•An amplifier with a subwoofer output connection, usually a RCA type connector would be the preferred connection when used with the MNCS subwoofer (see figure 3). A shielded audio cable is required for this setup with a
•
CENTER
LT FRONT
LT REAR
AMP
Figure 3
RT FRONT
POWERED
SUBWOOFER
RT REAR
•The other option requires the front left and right speaker cables be routed from the amplifier through the subwoofer to the speakers. The wires from the amplifier should be connected to the “HIGH LEVEL INPUT’ and the cables going to the speaker should be connected to the “HIGH LEVEL OUTPUT” on the subwoofer (see figure 4).
4 of 7