The function is turned on by pushing both the VOLUME UP and VOLUME DOWN buttons at the same time and holding them for 4 seconds.
10 & 11. OPTIONAL SECURITY INTERFACE - always active. If the system is connected with a SECURITY system the VOLUME UP button and VOLUME DOWN button are used to activate the panic alarm. The panic alarm is turned on by pushing both the VOLUME UP and VOLUME DOWN buttons at the same time and holding them for 4 seconds.
12.ROOM TALK button - always active. This button is used for communicating with the other rooms. To talk to someone in another room hold the ROOM TALK button in while talking in the direction of the microphone. The display will show that you are in the talk mode. Release the ROOM TALK button when you are finished talking.
NOTE: When talking to a person in another room, you will be heard at each speaker that is in the RAD/INT, or INT position (See section 18).
13.ROOM LISTEN button - always active. This button is used for listening to the other rooms. To listen to other rooms hold the ROOM LISTEN button in. The display will show that you are in the listen mode. Release the ROOM LISTEN button when you are finished listening.
NOTE: To get the maximum benefit from this Hands Free system, make it a house rule that whoever initiates a call will always follow up by pressing the ROOM LISTEN button. This allows someone to respond to the call without getting up or stopping their current activities.
NOTE: When listening to other rooms, you will hear each speaker that is in the MONITOR, RAD/INT, or INT position (See section 18).
12 & 13. DOOR TALK - always active. These buttons are used for communicating with the outside door speaker(s). To talk to someone at the door speaker(s) hold the ROOM LISTEN and ROOM TALK buttons in while talking in the direction of the microphone. The display will show that you are in the talk mode. Release the ROOM LISTEN and ROOM TALK buttons when you are finished
NOTE: When communicating with the person at the door(s), both sides of the conversation will be heard at each speaker that is in the RAD/INT, or INT position (See section 18).
14.BASS CONTROL - Recommended setting:12:00. This CONTROL is used to adjust the low tones of the audio heard on all the speakers (room speakers as well as the MASTER SPEAKER). Turning the BASS CONTROL clockwise increases the bass (makes the low frequencies louder) and turning it
15.TREBLE CONTROL - Recommended setting: 12:00. This CONTROL is used to adjust the high tones of the audio heard on all the speakers (room speakers as well as the MASTER SPEAKER). Turning the TREBLE CONTROL clockwise increases the treble (makes the high frequencies louder) and turning it counter- clockwise decreases the treble (makes the high frequencies quieter).
16.INTERCOM VOLUME CONTROL - Recommended setting: 12:00. This CONTROL is used to adjust the level of the intercom communications. Turning the INTERCOM VOLUME CONTROL clockwise increases the volume of intercom communications and turning it
17.MASTER SPEAKER VOLUME CONTROL - Recommended setting: Maximum. This CONTROL is used to control the volume of the MASTER SPEAKER. Turning the MASTER SPEAKER VOLUME CONTROL clockwise increases the MASTER SPEAKER volume and turning it
volume. The MASTER SPEAKER VOLUME CONTROL should be normally be set to maximum (fully clockwise) and the VOLUME UP and DOWN buttons should be used to adjust for the proper listening volume. If however, another room needs more volume than the MASTER SPEAKER, the MASTER SPEAKER VOLUME CONTROL may have to be turned down somewhat and then the music volume increased with the VOLUME UP button to get the perfect volume in each room.
18.INTERCOM SELECTOR SWITCHES These switches are used to control the operation of the Room Speaker in each corresponding room.
The MASTER SPEAKER Switch controls the MASTER SPEAKER.
The ROOM SPEAKERS Switches 1 through 9 control the corresponding Room Speakers.
The PATIO SPEAKER Switch controls the Patio Speaker(s).
8 |
| 9 |