There are four positions for each of these switches.
INTERCOM - A speaker with its switch set in the INTERCOM position will hear all intercom communications (including the chime, if used), but will not hear the audio sources (FM, AM, AUX, and TAPE).
| A speaker with its switch set in the |
| hear the audio sources (FM, AM, AUX, and TAPE) as well |
| as all intercom communications (including the chime, if |
| used). |
OFF | A speaker with its switch set in the OFF position will not |
| hear anything. |
Note: If one of the indoor rooms (master - 9) are turned off, that speaker can still be used to talk to other rooms or listen to other rooms when its talk and listen buttons are pressed. However, when the patio is turned off, it is disconnected from the master and can not be used to talk from, listen to, or anything else.
MONITOR | A speaker with its switch set in the MONITOR position will |
| not hear anything, but the speaker will be used as a |
| microphone. Any sounds that this microphone picks up will |
| be added to the selected source and heard from any |
| speaker that is in the |
| position can be used to listen to (monitor) a baby's or |
| elderly person's room.. |
NOTE: The sounds from the MONITORED room will be added to the selected
To listen only to the MONITORED room, simply turn the MC602 off with the POWER button.
The MC602 is normally configured so that intercom communications, including the door chime, will not be heard from the speaker being monitored. However as we understand that each customer and installation is unique, the MC602 can be configured with monitor override when it is installed. If the MC602 is configured with monitor override, all intercom communications, including the door chime, will be heard
from the speaker being monitored. See Appendix A for details on changing the monitor override configuration.
Your MC602 may be equipped with either a
IMPORTANT: At least one speaker (Master or Room Speaker) must be in the
To make your MC602 easier to use, you should label the INTERCOM SELECTOR SWITCHES. Remove the door that covers the switches by pulling it straight out. Turn the radio ON but move all the INTERCOM SELECTOR SWITCHES to OFF. Move one switch at a time to
10 |
| 11 |