M&S Systems PSW112 owner manual Line Level Connections, Speaker Level Connections, M&S Systems

Page 6 PSW112 Owners Manual

The PSW112 Line Level Connections are shown in the picture below and can be found on the back of the subwoofer.

Line Level Connections

3.Connect using speaker wires – Connect the wires from the amplifier to the “Speaker Level Inputs” and the wires going to the speakers should be connected to the “Speaker Level Outputs”.

IMPORTANT! Make sure there are no loose strands of wire touching each other across the speaker or amplifier terminals. This can create a short circuit and damage your electronics.

M&S Systems Page 7

The Speaker Level Output has a 100Hz built-in high pass filter.

The PSW112 Speaker Level Connections are shown in the picture below and can be found on the back of the subwoofer.

Speaker Level Connections

Plug in the PSW112 power cord. Do not plug the PSW112 subwoofer into a switched outlet on your receiver. The PSW112 has an automatic stand-by circuit to ensure prompt power up and connecting the unit to a switched outlet will delay the output and lead to noise on power down.