M-Audio 3 manual Speaker Wire Connections, Setting the “Bass Boost” EQ Switch

Speaker Wire Connections

Use the transparent 1/8" mini cable included in the StudioPro 3 package to connect the Left and Right speakers via the 1/8" mini jacks on the back of each speaker.

Connecting to a Computer Sound Card or Other Audio Output Device

Before connecting the StudioPro 3 monitors, make sure the power from the computer or other output device has been turned off and the StudioPro 3 system is also turned off.

Plug the RCA cable to the corresponding output connectors of a computer sound card, portable music player, etc. You can also use the black 1/8" stereo mini cable to connect a secondary audio device to the “Aux” input on the front of the StudioPro 3.

Setting the “Bass Boost” EQ Switch

This 2-position switch provides a subtle increase in bass response. The On mode increases the low-frequency gain slightly via the woofer and bass-reflex port. The Off mode produces a natural, even response for most listening conditions.

Please see Appendix C for the “Bass Boost” frequency response curve.

8