![](/images/new-backgrounds/1150535/1505357x1.webp)
4 | KeyStudio 49i Quick Start Guide |
What’s in the Box?
<
<Printed Quick Start Guide
<
•Software drivers and documentation
•
<Ableton Live Lite
<USB cable
If any of the above listed items are missing, please contact the retailer where you purchased the product.
About this Guide
This Quick Start Guide covers:
<Basic operation of KeyStudio 49i.
<Driver installation for KeyStudio 49i.
<Using KeyStudio 49i with
Basic Operation of KeyStudio 49i
1. Use the provided USB cable to connect KeyStudio 49i to an available USB port on your computer. The USB cable not only powers the keyboard but also transmits MIDI data to and from your computer.
2. Make sure that the power switch on the back of the keyboard is in the “on” position. KeyStudio 49i is now ready to be used – no additional installation
steps are required for basic operation.
ON
3. Connect the two 1/4" outputs on the rear panel of KeyStudio 49i to powered monitors, an amplifier, or a mixer.
You may also listen through headphones by connecting one or two sets of headphones to the 1/4" stereo headphone outputs on KeyStudio 49i.
4.Be sure the Piano Vol. knob is at a reasonable listening level.
5.Play the keyboard.