M-Audio AV20 manual Appendix B Technical Specifications, Rms Spl

6Studiophile AV 20 User Guide

Appendix B - Technical Specifications

Type:	Two-way desktop reference monitor
LF Driver:	2” composite paper/fiberglass cone woofer, magnetically shielded
HF Driver:	1” ferro-fluid cooled, Mylar balanced-dome tweeter
Frequency	120Hz-20KHz ±3 dB
Response:
Crossover	2.8 kHz
Frequency:
RMS SPL:	90dB@1 meter
S/N Ratio:	>80dB typical A-weighted
Input	Left and right RCA Line input
Connector:
Polarity:	Positive signal at + input produces outward low-frequency cone displacement
Dynamic	10 watts into 4 ohms per channel, Class-D amplifier
Power:
Input	10K ohms unbalanced
Impedance:
Input	100mV pink noise input produces 84dBA output SPL at one meter with
Sensitivity:	volume control at maxmium
Protection:	RF interference, output current limiting, over temperature, turn on/off transient,
	subsonic filter
Indicator:	Blue power LED ring around volume knob on front panel
Power	Factory programmed for either 100-120V~50/60Hz, 220-240V~50/60Hz
Requirements:
Cabinet:	Vinyl-laminated MDF
Dimensions:	7.8”(H) x 3.9”(W) x 6.16”(D)
Weight:	4.6kg

Specifications subject to change without notice

©2006 Avid Technology, Inc. All rights reserved. Product features, specifications, system requirements and availability are subject to change without notice. Avid, M-Audio and Studiophile AV 20 are either trademarks or registered trademarks of Avid Technology, Inc. All other trademarks contained herein are the property of their respective owners.