Power Connections

AC Connector and Power Switch

The AC connector accepts a standard modular AC power cord. One power cord is included with your speaker. Use the Power switch to turn the speaker on or off.

Voltage Selector

Before connecting a DSM2 speaker to a power source, make sure the Voltage Selector setting matches your local voltage (100–120V or 220–240V).

Fuse

The fuse protects components of the DSM2 speaker from being damaged by electrical under- or over-powering, spikes, and other anomalies.

A 2.5 Amp fuse is required for both the 100–120V and the 220–240V settings.

Make sure to use a fuse rated at 2.5 Amps. Do not use fuses of any other rating, or you risk damage to the unit

Inputs

Input Selector Switch

The input selector switch selects between the following input states for the speaker:

Analog Activates the analog inputs of the speaker.

Digital Activates the digital inputs of the speaker.

Digital Standby Activates the digital inputs of the speaker, but automatically puts the speaker in a low-power standby mode when the digital clock signal is lost for more than one second (for example, when the digital source is powered off). When the clock signal is restored, the speaker wakes up from standby mode.

Analog Inputs

The DSM2 speaker provides an XLR analog in- put connector and a balanced 1/4-inch TRS ana- log input connector.

The analog input signal is converted to a

96kHz, 24-bit digital signal for crossover/EQ processing, and converted back to analog just prior to the power stage of the driver amplifiers.

Signals may be sent to the two analog input con- nectors at the same time. When two analog in- put signals are present, they are summed.

XLR Connector

The XLR Analog In connector is balanced. (If the signal source is unbalanced, connect the unused pin to ground.)

1/4-inch TRS Connector

The 1/4-inch TRS Analog In connector is bal- anced. (If the signal source is unbalanced, con- nect the unused pin to ground.)

Analog Input Sensitivity Switch

The analog input operating level can be switched between –10 dBV and +4 dBu. This set- ting applies to both the XLR and 1/4-inch TRS analog inputs. For information on the appropri- ate operating level for your audio source, see the manufacturer’s specifications.

4M-Audio Studiophile DSM2 Guide

DSM2 specifications

The M-Audio DSM2 is a groundbreaking studio monitor designed to elevate the listening experience for musicians, producers, and audio engineers. This innovative speaker combines advanced technology, exceptional sound accuracy, and professional-grade features, making it a standout choice for both home studios and commercial recording environments.

At the heart of the DSM2 is its DSP-driven design, which utilizes advanced digital signal processing to deliver precise sound reproduction. This technology ensures that mixes translate well across various playback systems, allowing users to make informed decisions about their audio. The DSM2 features a 5-inch low-frequency driver and a 1-inch high-frequency tweeter, which work together to produce a balanced frequency response across the entire audio spectrum, from deep bass to crystalline highs.

One of the standout features of the M-Audio DSM2 is its extensive room adaptation capabilities. Equipped with a rear-panel EQ section, the monitor allows users to tailor the sound characteristics to their specific room environment. With high-frequency and low-frequency filters, users can optimize the DSM2’s performance to counteract acoustic anomalies typically found in various studio setups. This flexibility ensures that users can achieve accurate sound reproduction, regardless of their studio’s acoustic challenges.

The DSM2's built-in amplification further enhances its performance. The bi-amped design employs dedicated amplifiers for the woofer and tweeter, resulting in more efficient power distribution and minimizing distortion. This design allows the monitor to maintain clarity and detail even at higher volume levels, making it suitable for both critical listening and casual playback.

In addition to its acoustic prowess, the M-Audio DSM2 also emphasizes user-friendly connectivity. It features balanced XLR and TRS inputs, ensuring compatibility with a wide range of audio interfaces and mixing consoles. This makes it easy for producers and engineers to integrate the DSM2 into their existing studio setups.

Overall, the M-Audio DSM2 is a top-tier studio monitor that combines innovative technology, versatile features, and exceptional sound quality. Its DSP-driven design, room adaptation capabilities, powerful amplification, and user-friendly connectivity make it an ideal choice for professionals seeking precise audio representation. Whether for tracking, mixing, or mastering, the DSM2 proves to be an invaluable tool in any sound engineer's arsenal.

M-Audio DSM2 manual Power Connections

Models: DSM2