10 IE Professional Reference Earphones User Guide
EARPHONE CARE AND MAINTENENCE
<Keep earphones clean by using a moistened antiseptic wipe after each use.
<Avoid exposing your earphones to water, extreme temperatures, high humidity or prolonged exposure to ultraviolet light.
<Use the cleaning tool regularly to keep the ear conductor clear and unobstructed.
<Clean and change the ear tips regularly.
<Avoid physical abuse of earphones. Dropping or striking them may damage the components.
<Do not pull on the cables to remove the earphones from your ear.
<Do not pull the cables to remove the input plug from a listening device.
Using the Cleaning Tool
<Remove ear tip and wipe the exterior of the ear conductor with an antiseptic wipe.
<Using the cleaning tool, angle into the ear conductor and use a gentle upward and outward sweeping motion to remove any
<Clean the ear conductor again with an antiseptic wipe and attach a new and clean ear tip.
SUGGESTIONS FOR
USING EAR TIPS
<If the ear tips on the earphones don’t seal well or are uncomfortable, try some alternate ear tips until the best fit for your ear is achieved.
<If you have difficulty inserting the ear tip into your ear canal, identify the left earphone (marked with an “L”) and the right earphone (marked with an “R”). Inserting them one at a time, gently grasp the top ridge of your ear and extend the ear upward and outward to open up the ear canal while you rock the earphone forward and then roll it back into your ear canal.
<Flanged silicone ear tips: For best results, moisten the external surface of the flanged silicone ear tip before you insert it into the ear canal. This will allow the ear tip to slide more easily into place and create a good seal.
<Disposable foam ear tips: Compress the foam at the end of the earphone by pressing it between your thumb and forefinger before inserting it into the ear canal. Hold the earphone in place for five seconds while the foam expands to create a tight seal in the ear canal.
