Oxygen Keyboard Line User Guide
10 › Advanced Programming Functions
Introduction to Programming Options
MIDI CC (continuous controller) numbers are part of the General MIDI specification and are typically used to control the
As mentioned in Section 6, many of the controls on the Oxygen range are fully programmable. This means that you can assign them to send all sorts of different MIDI messages. This is achieved by selecting the controller for programming and assigning a
The assignable buttons and pedals have slightly different options from the faders or rotary dials.
The two charts show the transmit messages that can be programmed for each of the knobs, faders, and assignable buttons or pedal.
Please pay extra attention to the differences between programming the faders or knobs and programming the buttons or pedal.
Faders and Rotary Dials:
MIDI CC | Description | Data 2 | Data 3 |
|
|
|
|
Standard MIDI CC's | Min | Max | |
|
|
|
|
Channel Mode Messages | Min | Max |
128Pitch Bend Sensitivity
129Channel Fine Tune
130Channel Coarse Tune
131Channel Pressure
132 | RPN coarse | RPN LSB | RPN MSB |
|
|
|
|
133 | RPN Fine | RPN LSB | RPN MSB |
|
|
|
|
134 | NRPN Coarse | NRPN LSB | NRPN MSB |
|
|
|
|
135 | NRPN Fine | NRPN LSB | NRPN MSB |
136Master Volume GM*
137Master Pan GM*
138Master Coarse Tune GM*
139Master Fine Tune GM*
140Chorus Mod rate GM2*
141Chorus Mod Depth GM2*
142Feedback GM2*
143Send to Reverb GM2*
144 | Pitch Bend | - | - |
|
|
|
|
255 | Controller Off*** | - | - |
English
15