Technical Specs, Studiophile SBX Specification

Technical Specs

• Type : Bass-reflex powered subwoofer
Studiophile SBX Specification * :
•	Woofer Driver : 8-inch mineral-filled polypropylene cone with high-temperature
•	voice coil and damped rubber surround
	Frequency Response : 30Hz – 180 Hz
•	Low-Pass Filter : Butterworth –12dB/octave <325Hz, -24dB/octave > 325Hz
•	Crossover Frequency : Adjustable 50Hz - 180Hz
•	Amplifier Power : 100W @100Hz, 4 ohm, 0.1% THD
•	Input Sensitivity :	89dB
•	S/N Ratio : > 100dB below full output, 100Hz
•	Dynamic Power :	120W
•	Input Connectors :	Two XLR balanced inputs; two TRS balanced/ unbalanced inputs
•	Output Connectors : Two XLR balanced outputs for satellites, one XLR
•	balanced output for additional subwoofer
	Controls: Level : Phase; Subwoofer Frequency; Satellite Frequency
•	Switches : Auto on/off; Satellite high-pass output bypass
•	Input Impedance :		20k ohms balanced, 10k ohms unbalanced
•	Input Sensitivity :		150mV input produces full output with volume control
•	at maximum
	Protection : Over temperature, turn-on/off transient, subsonic filter, external
•	mains fuse, ALC (avoid from hard clipping)
	Indicator : Power On (green) or Stand-by/Protection (Amber)
•	Power Requirements : Dual-voltage (selectable by rear-panel switch) for
•	either 120V/~60Hz, 230V/~50Hz; powered via detachable 3-circuit line cord
	Cabinet : Vinyl-laminated MDF
•	Dimension : 15.6 in. (h) x 10.63 in. (w) x 12 in. (d)
•	Shipping Weight : 36 lbs.
*	Specifications subject to change without notice.