M-Audio Transit USB specifications Windows 98SE, E N G L I S H

E

N G L I S H

5.After the driver files have been installed, you will be prompted to restart your computer. Click Finish and your computer will reboot.

6.On rebooting, the M-Audio Transit USB Control Panel icon will appear in the system tray. Connect the Transit USB to your computer’s USB port.

7.The New Hardware Wizard will write the remaining files to your system.

8.If you are running an older version of Windows ME, you may be required to replace the file ksuser.dll. Click Yes to continue.

9.If you are running an older version of Windows ME, you may be required to replace the file stream.sys. Click Yes to continue.

10.After the installation is complete, you may double-click on the M-Audio Transit USB Control Panel icon to open the Transit USB Control Panel. See the section “Transit USB Control Panel” for more information on the Control Panel’s features and function.

Windows 98SE

Note: Transit USB requires that you have Microsoft DirectX version 8.1 or later installed. The Transit USB installer will automatically check for the correct version of DirectX and install the latest Direct X update. This update will be

skipped if you already have DirectX version 8.1 (or higher) in your system.

1. Place the Transit USB CD into your CD-ROM drive. Do NOT connect the Transit USB to your computer’s USB port at this time. Browse the CD content and double click the Transit USB folder.Then double click the Transit USB Icon.

2. The M-Audio Transit USB Installer screen will appear, asking you to confirm that you wish

E

N G L I S H

14 15