
Talkback
The mixer's
TALKBACK MIC
The
TALKBACK Switch
Press this switch in to talk. This is a momentary switch, and as long as you hold it in, talkback is activated.
If phones is chosen as your talkback destination, the control room outputs are attenuated (ducked) to allow your voice to come through clearly.
DESTINATION: PHONES, AUX 1-4
Push in the phones talkback destination switch to communicate with the talent in the studio through the headphones during a recording session.
The aux
In a studio, an aux out could be fed to the input of a headphone amplifier feeding several sets of headphones.
It is fine to have both talkback destination switches pushed in at the same time. If you don’t have either switch pushed in, the talkback signal won’t go anywhere.
TALKBACK LEVEL
Use the talkback level knob to control the level of the signal from the internal microphone.
1.Start with this level turned down.
2.Select the destination: headphones and/or aux
3.Press the talkback switch as you talk.
4.Slowly turn the talkback level knob up until they can hear you in phones or monitors.
5.Release the talkback switch when you are finished talking.
Once you have set the level, you can leave it there for the duration of the session or gig.
Aux Sends
Headphones
48V | 48V | 48V | 48V | 48V | 48V | 48V | 48V |
MUTE | MUTE | MUTE | MUTE | MUTE | MUTE | MUTE | MUTE | MUTE | MUTE | MUTE | MUTE |
SOLO | SOLO | SOLO | SOLO | SOLO | SOLO | SOLO | SOLO | SOLO | SOLO | SOLO | SOLO |
Talkback
Destination Level
Talkback Switch
14Onyx 1620i