SPEAKER
ART400A
Architects’ & Engineers’ Specifications
ART400A
The amplified loudspeaker system shall be a
The loudspeakers shall consist of a 15 inch
Two discrete amplifiers shall be provided, capable of continuously delivering 300W RMS to the
The integrated mic/line input shall be actively balanced, may accept an unbalanced input, and shall be paralleled to an output. Both shall have XLR connectors. The input shall have a switch to select between 10mV mic and 775mV line levels. The unit shall be provided with both voice and music optimi- zation equalization that can be activated with but- tons on the rear panel. The voice equalizer shall pro- vide +4dB at 3kHz and +4db at 6kHz. The music equalizer shall provide +4.3dB at 65Hz and +4dB at 12kHz. A continuously variable, rotary master volume control shall be provided.
www.mackieindustrial.com
16220
UK + 44 1268 570 808, fax + 44 1268 570 809,
The power supply shall be internal and con- nected to 50 or 60Hz source current through a detachable IEC power cord and shall have an IEC socket for mains power
The reinforced polypropylene enclosure shall have a volume of at least 2.64 cu. ft., be trapezoidal shaped and equipped with a grille to protect the cone driver. At least four M10 and two M8 threaded sockets and stand socket shall be molded into the cabinet for attaching mounting hardware, designed for the unit and available from the manufacturer. The amplified loudspeaker system shall be a model ART400A manufactured by Mackie Industrial.
Electronic files for this product available at: www.mackieindustrial.com
This Specification Sheet | ART400A.PDF |
Architects’ & Engineers’ Specifications ART400AAE.TXT | |
ART400AQS.PDF | |
Owner/Operator’s Manual | ART400AML.PDF |
CADD files | ART400A.DXF |
EASE data | ART400A.EAS |
Mackie Designs continually engages in research related to product improvement. New material, production methods, and design refinements are introduced into existing products without notice as a routine expression of that philosophy. For this reason, any current Mackie Industrial product may differ in some respect from its published description, but will always equal or exceed the original design specifications unless otherwise stated.
rights Reserved. and are registered trademarks of Mackie Designs Inc. Mackie Industrial is a trademark of Mackie Designs Inc.
| part no. |
6 | O F 6 P A G E S |