Mackie C200 C200 SPECIFICATIONS, Audio, Disclaimer, Safety Features, Physical Properties, System Specifications, Construction Features, Transducer Specifications

C200 SPECIFICATIONSSystem Specifications

Frequency Response (–3 dB)

89 Hz – 20 kHz

Frequency Range (–10 dB)

59 Hz – 22 kHz

Maximum SPL Long-term @ 1m 118 dB Low-Frequency Crossover Type

6 dB/octave, time offset corrected

High-Frequency Crossover Type
12 dB/octave
Crossover Frequency	1800Hz

Safety Features

Driver Protection

Dynamic protection for compression driver

Construction Features

Basic Design	Asymmetrical Trapezoidal
Material	Polypropylene
Finish	Grey, textured finish
Handles	One on left side, one on top
Grille	Perforated metal with weather-
	resistant coating

Audio

Input Type	Speakon®-style
	1/4-inch TS phone jack
Input Impedance	8 ohms
Power Handling
RMS:	200 watts
Music:	350 watts
Peak:	500 watts

Operating Temperature Range –10ºC to 45ºC (14ºF to 113ºF)

Transducer Specifications

Low-Frequency Transducer

Diameter	10 in/250 mm
Voice Coil Diameter	2.0 in/51 mm
Sensitivity (1W@1m)	96 dB
Frequency Range	59 Hz – 3000 Hz

High-Frequency Driver and Horn

Diaphragm Diameter	1.4 in/36 mm
Horn Exit Diameter	1 in/24.5 mm
Diaphragm Material	Titanium
Sensitivity (1W@1m)	104 dB
Frequency Range	1000 Hz – 20,000 Hz

Horn Type

Composite: Exponential and Conical

Mouth Size

12 in/305 mm W x 7 in/178 mm H

Horizontal Coverage

90º (1 kHz – 20 kHz) Vertical Coverage

80º (1 kHz – 20 kHz)

Physical Properties

Height	20.75 in/527 mm
Width	13.10 in/333 mm
Depth	12.25 in/311 mm
Weight	26.0 lb/11.8 kg

Mounting Methods

Optional accessory plates for top and bottom of enclosure

Disclaimer

Since we are always striving to make our products better by incorporating new and improved materials, components, and manufacturing methods, we reserve the right to change these specifications at any time without notice.

“Mackie” and the “Running Man” figure are registered trademarks of LOUD Technologies Inc.

All other brand names mentioned are trademarks or registered trademarks of their respective holders, and are hereby acknowledged.