14
d.2 DJ Mixer
d.2 2-channel DJ Mixer
Control Section

32. MAIN LEVEL

Control

This knob adjusts the
main output level at the
MAIN OUT XLRs [9]
(and to the RCA Main
Outs [11] when the
LIVE/RECORD switch
[12] is out). (Remem-
ber, when the LIVE RE-
CORD switch is pushed
in, the RCA Main Outs
are not affected by the
MAIN LEVEL control.)

33. BOOTH LEVEL

Control

This knob adjusts
the output level at the
BOOTH outputs [8].

34. STEREO/MONO Switch

With this switch up, the BOOTH outputs [8] provide
a stereo left and right output of the main mix. Push the
switch in to combine the left and right signals to mono if
you only have one booth monitor speaker.

35. FX SEND LEVEL Control

This knob controls the amount of signal being sent to
FX SEND outputs [6]. Adjust this knob to provide an
appropriate input signal level to your external effects
processor (or whatever you have connected to the FX
SENDs). It ranges from off to +13 dB at maximum.
Note: The FX SENDs are affected by the TRANSFORM
switches [40], so if you mute a PGM channel with the
TRANSFORM switch, the FX SEND for that PGM chan-
nel is muted as well.

36. FX RETURN LEVEL Control

This adjusts the signal level coming from your exter-
nal effects processor via the FX RETURN jacks [7]. Use
it to adjust the processed signal going to the main mix
bus. It ranges from off to +13 dB at maximum.
LOW
MID
HIGH
PHONES
BOOTH
MAIN
SOURCE
EQ
FX
PAN BAL
LOW
MID
HIGH
LINE/
PHONO
CD
EQ
SIG
OL
MIC CONTROL
2PGM
LEVEL
PGM
MAIN
STEREO
MONO
+50+3
OO
RL
U
+15-15
U
+15-15
U
+15-15
SOURCE
EQ
BAL
LOW
MID
HIGH
LINE/
PHONO
CD
1
PGM
RLRL
KILL +10
KILL +10
KILL +10
KILL +10
KILL +10
KILL +10
OFF
ON LEVEL
U
OO
MAX
LEVEL
U
OO
MAX
RETURN
+15
OO
SEND
+15
OO
LEVEL
MAX
LEVEL
U
OO
MAX
LEVEL
U
OO
MAX
PGM SOURCE
111 2
48V
FX
ON FX

37. PHONES LEVEL Control

This controls the volume of the PHONES output from
off to maximum gain.
Turn it to minimum before connecting and
putting on headphones. Increase it slowly to
a safe listening level. See page 17.

38. PGM/MAIN Switch

Use this switch to select the source for the head-
phones signal. When the switch is up (PGM position),
the signal is tapped just after the BAL control [30] on
the PGM channels. You can use the PGM SOURCE cross-
fader [39] to fade between PGM 1 and PGM 2.
When the switch is down (MAIN position), the signal
is tapped from the Main Mix bus, just before the MAIN
LEVEL control [32].

39. PGM SOURCE Cue Crossfader

When the PGM/MAIN switch [38] is up (in the PGM
position), you can use this crossfader to listen to PGM
1 and PGM 2 in the headphones. When the crossfader
is all the way to the left, PGM 1 is heard in the head-
phones. When the crossfader is all the way to the right,
PGM 2 is heard in the headphones. When the knob is in
the center, the headphones get an even mix of PGM 1
and 2.
Note: When the PGM/MAIN switch is down (MAIN
position), this control has no effect on the PHONES
output.