Mackie De-Esser, DSR-1 I/O Levels

I/O Levels

DSR-1 I/O Levels

IN/OUT

The input and output meters are located at the far-left side. These meters represent the incoming signal and the output (post effect) signal.

OL (overload) is represented by the two small boxes above the in/out meters. The left-most overload indicator is for input level, and the other one is for output. They flash red if overload is occurring.

INPUT

The INPUT knob determines the gain or attenuation that is applied to the input signal.

User’s Guide

Contents

Page Iconography Introduction Main Features Let’s Get Started Using the DSR-1 Specifications Introduction About Acuma Labs About the D8B UFX Card About the DSR-1 (De-esser) Let’s Get Started Requirements Main Features Using the DSR-1 Front Panel Overview The Status Block Global Controls Block Page I/O Levels Controls Block Page Meters (S-BANDand GAIN) Specifications DSR-1Factory Presets