Remote 24
Locator Features
Locate
1 | 2 | 3 |
| 4 |
|
| LOCATE |
| LOCATE |
| STORE |
|
|
|
|
|
|
Locate points provide fast access to frequently used locations in your project. Press one of the four Locate buttons to jump to a Locate point.
Store
To set a Locate point, press Store, then press a Locate button when the transport reaches the desired time.
STORE
Loop
Locate 1 and Locate 2 double as start and end points for looped playback. To enable loop play, press Loop. Playback cycles between the two Loop points. The order of the Loop points does not matter.
LOOP
12
LOCATE
Punch
Locate 3 and Locate 4 double as in and out points for automated punching. To enable automated punching, press Punch. When you engage record, the HDR24/96 automatically punches in at the first Punch point, and punches out at the second. The order of the Punch points does not matter.
PUNCH
34
LOCATE
Pre Roll
Pre Roll causes a Locate to jump to a time that is earlier than the Locate time by the amount of the Pre Roll Time.
Pre Roll is handy for autopunching, where you need to start PRE ROLL playback a few seconds before the Punch in point. Pre Roll
Time is set in the HDR24/96 MIDI Setup window.
8 | Remote 24 |
|