2/6/98

32x2x2 STEREO LINE MIXER

1.GENERAL CONFIGURA- TION. The audio mixer shall have a rack-mountable frame which accommodates

16stereo input channels, 2 main output channels and 2 alternate output channels.

Each input channel shall be capable of accepting either stereo or monaural signals, and shall be fitted with stereo level, equalization, balance, solo, muting and auxiliary send controls, level-indicating (-20) LEDs and overload (O/L) LEDs. Input channels 1 through 4 shall each be fitted with left and right insert jacks. The main output channels shall each have a level control, an electronic level meter and a bus insert jack.

Additionally, the mixer shall include a solo function, a monitor switching and control function, 4 stereo effects return inputs with alternate routing switching, 2 stereo pairs effects send outputs, 2 monaural effects send outputs, 1 stereo pair control room output, 1 stereo headphone output, 1 set of stereo tape recorder RCA outputs, and 1 set of stereo tape monitor RCA inputs. The mixer shall also include 2 independent patchable microphone pre- amplifiers, each fitted with an electronically balanced

XLR input switchable phantom microphone powering, a preamplifier gain control and a balanced line-level output.

2.POWER SUPPLY. All

necessary operating volt- ages for the mixer shall be provided by an internal shielded power supply.

3.INPUT CHANNEL CON- NECTIONS. Each mixer input channel shall have a left and a right electroni- cally balanced line-level input, accommodating a nominal line level of be- tween –10 dBV and +4 dBu, and appearing on the rear panel as 1⁄4" TRS phone jacks (tip hot, ring cold). The jacks shall be fit- ted with internal switches to accommodate monaural configuration. Additionally, input channels 1 through 4 shall offer left and right unbalanced insert connec- tions, appearing on the rear panel as 1⁄4" TRS phone jacks (tip send, ring return).

4.INPUT CHANNEL LEVEL AND ASSIGNMENT CON- TROLS AND INDICATORS. Each mixer input channel shall be equipped with a rotary dual gain control, a solo switch, a mute switch which also functions as an assignment switch to the alternate output channels, and a stereo balance control.

5.INPUT CHANNEL EQUALIZATION. Each mixer input channel shall be equipped with a stereo equalization function. The equalizer shall have three sections: a low-frequency

®

MORE INFORMATION

THESE SPECIFICATIONS ARE AVAILABLE ON 3.5"

PC & MAC FORMAT DISK INPOPULAR WORDPROCESSOR FORMATS

■

CALL 800/258-6883 FAX 425/487-4337OUTSIDE THE U.S., CALL425/487-4333

shelving equalizer with the knee set at 80 Hz and a range of ± 15 dB; a mid- frequency peaking equalizer centered at 2.5 kHz featuring a bandwidth of 2 octaves and a range of ± 12 dB; and a high-frequency shelving equalizer with the knee set at 12 kHz and a range of ± 15 dB.

6.INPUT CHANNEL AUXIL- IARY SENDS. Each mixer input channel shall have 1 stereo auxiliary send control and 1 monaural auxiliary send control. The auxiliary send controls shall be switchable between 2 sets of auxiliary send buses,