2
accommodating a total of 2 stereo auxiliary send buses and 2 monaural auxiliary send buses.
7.MAIN OUTPUT CONNEC- TIONS. The mixer shall have electronically balanced, line- level left and right main out- puts, appearing as 1⁄4" TRS jacks (tip hot, ring cold) on the rear panel. Additionally, the main buses shall offer left and right unbalanced insert connections, appear- ing on the rear panel as 1⁄4" phone TRS jacks.
8.OTHER OUTPUT AND MONITORING CONNEC- TIONS. The mixer shall have the following balanced line- level connections, appearing as 1⁄4" TRS jacks on the rear panel: left and right alter- nate
9.OUTPUT AND MONI- TORING CONTROLS AND SWITCHES. The mixer shall include 2 linear fader con- trols for gain adjustment of the main L/R outputs, cov- ering a range from infinite attenuation to +10 dB above unity gain. A tape monitor switch shall alter- nately select either the main L/R outputs or the signal at the tape inputs as the source for the control
room and headphones monitoring circuits. There shall be a stereo linear fader control for level adjustment of the control room monitor output, and a stereo rotary control for level adjustment of the headphone monitor output. The mixer shall have a stereo control for adjustment of the monitoring level of the internal solo signals, and a blinking LED to indicate channel solo condition. Additionally, any soloed channel(s) shall have their
10.OUTPUT METERING. The mixer frame shall in- clude 2
11.AUXILIARY SEND CON- NECTIONS. The mixer shall include balanced
12.AUXILIARY RETURN CONNECTIONS. The mixer shall include 4 stereo auxil- iary return inputs. Each aux- iliary return shall have a left and a right unbalanced line- level input, accommodating a nominal line level of be- tween
and shall appear on the rear panel as 1⁄4" phone TRS phone jacks. The jacks shall be fitted with internal switches to accommodate monaural configuration, by using only the left jack(s).
13.AUXILIARY RETURN CONTROLS AND SWITCHES. The mixer shall include 4
14.MICROPHONE PRE- AMPLIFIERS. The mixer shall include two micro- phone preamplifiers mounted on the rear of the mixer frame. Each micro- phone preamplifier shall feature electronically balanced transformerless inputs using female
15.MIXER EXPANDER FUNCTION. The mixer buses shall accommodate up to
48additional stereo input channels when connected to up to 3 Mackie Designs
The mixer shall be fitted with a
2