PPM608

Hookup Diagrams

Front Panel

Power Amp Mode

 

 

 

 

switch set to

Rear Panel

 

Stereo Main

Microphones

 

press HI-Z

press HI-Z

button

button

 

Adjust

Vocal

Compression

Keyboards

Portable Recorder

SRM450v2 Powered Stage Monitors

(plays mon 1 output)

Passive Speakers

(plays stereo main mix)

Powered Subwoofers

(plays main mix below 100 Hz)

This diagram shows microphones attached to channels 1 and 2, electric guitars connected directly to channels 5 and 6 (with hi-z switch pressed in), and a keyboard attached to channel 7's stereo inputs. A portable recorder is attached to the stereo tape outputs to record the performance.

Mackie SRM450v2 powered speakers are connected to the monitor 1 send, and are set up as stage monitors. The mon 1 controls of each channel allow you to create a stage monitor mix that is independent of the main mix. Use the monitor 1 graphic EQ to adjust the stage monitor EQ as desired.

Passive speakers are connected to the speaker-level power output of the powered mixer, and they play the main stereo mix to your audience. Powered subwoofers are connected to the main mix sub out, to reinforce the low end in your system.

Club System

PPM608