Microphones

Acoustic Guitar

 

 

 

 

 

 

 

 

and Mic

Front Panel

Power Amp Mode

 

 

 

 

switch set to

 

 

 

 

Mains/Mon 1

Rear Panel

 

 

 

 

pressHI-Z button

Adjust

Vocal

Compression

Drum

Machine

Power

Amplifier

dual-mono

C200 Passive Stage Monitors

mode

(plays mon 1 output)

Manual Owner’s

Keyboards

SRM150 Powered Monitor

 

 

 

 

 

 

 

 

(plays mon 1 output)

C300z Passive Speakers

 

Passive Subwoofers

House System

 

(plays main mix below 100 Hz)

(plays mono main mix)

This diagram shows microphones attached to the mic inputs of channels 1 to 4, an electric guitar connected directly to channel 5 (with hi-z switch pressed in), an acoustic guitar microphone connected to channel 6 mic in, a keyboard attached to channel 7's stereo inputs, and a drum machine to channel 8.

A Mackie SRM150 powered monitor is connected to the monitor 1 send, and acts as a personal stage monitor to the keyboard player. The mon 1 knobs of each channel allow you to set up a monitor mix that is independent of the main mix. Use the monitor 1 graphic EQ to adjust the stage monitor EQ as desired.

The power amp mode switch is set to play the mono main mix on ch. A, and monitor 1 mix on ch. B.

Mackie C300z passive speakers are connected to the channel A speaker-level power output of the powered mixer, and they play the main mono mix to your audience.

C200 passive stage monitors are connected to the channel B speaker-level power output of the powered mixer. These play the stage monitor mix 1 to your performers.

Passive subwoofers are powered by a power amplifier connected to the main mix sub out, to reinforce the low end in your main mix.

House of Worship

Owner’s Manual