14

Diaphragm replacement:

1 At the present time (December 2006), diaphragms are not currently available, so you will have to replace the complete driver following the previous section (pages 10-13). If you have received

a diaphragm, please follow the steps below.

2 Follow steps 1-5 of the high frequency driver replacement instructions, as the horn will need to be removed in order to access the diaphragm.

12

4

3

 

 

The horn assembly is shown above with

4

Keep the four screws in a safe place.

3 the high frequency driver circled. Four

 

screws need to be removed from the driver using the 3mm allen wrench.

5 The diaphragm and plate adapter are easily removed from the horn assembly.