3
Led PCB replacement:
1 | 6 |
2 | 7 |
3 | 8 |
4 | 9 |
5 | 10 |
1 Five screws need to be removed from each side of the grill (ten screws total) using the phillips head screwdriver.
3 Carefully begin to remove the grill. The grill has a tendency to want to “pop out,” so please be sure to hold the grill in place with your free hand while removing the screws with the other hand. Do not fully remove the grill as the cable is still firmly attached to the led PCB assembly.
4 Carefully remove the cable attached to the led PCB assembly.
|
| Use the phillips head screwdriver to | ||
2 | Keep the ten screws in a safe place. | 5 remove one screw from the center of the | ||
| led PCB assembly. | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|