Getting Started

The following steps will help you set up your subwoofer(s) quickly.

INITIAL SETTINGS:

1.Turn the LEVEL control on the rear panel all the way down.

2.Turn the POWER switch OFF.

CONNECTIONS:

1.Connect the line-level signal from a mixer (or other signal source) to the INPUT jack on the TH-18s rear panel (XLR connector). If you are operating the system in stereo, connect INPUT B, as well.

2.Connect the supplied AC power cord to the IEC socket on the back of the subwoofer. Plug the other end into an AC outlet properly configured with the correct voltage as indicated just above the IEC socket.

TURN IT ON:

1.Turn the POWER switch ON.

2.Start your signal source (mp3 player, CD, DAW, band, or whatever), but leave the master level control on your mixer down.

3.Slowly turn up the LEVEL control on the TH-18s to the “U” (unity gain) mark at the center position.

4.Adjust the master volume on your mixer to a comfortably loud listening level. If the volume from the subwoofer gets really loud, really fast, try turning down the LEVEL control on the TH-18s a bit. If

the subwoofers don’t get loud enough, turn up the LEVEL control to achieve a good balance of master volume control and loudness from the subwoofer.

Now that you have your subwoofers working, it’s time to hunker down and read the rest of this manual… especially the following:

ADDITIONAL TIDBITS OF WIDSDOM:

Never listen to loud music for prolonged periods.

Please see the Safety Instructions on page 2 for information on hearing protection.

When you shut down your equipment, turn off the

TH-18s subwoofers first to prevent thumps and other noises generated by any upstream equipment from coming out the speakers. When powering up, turn on the TH-18s last, but just before your full-range loudspeakers.

Save the shipping boxes and packing materials!

You may need them someday. Besides, your

cat will love playing in them and jumping out at you unexpectedly. Remember to pretend like you are surprised!

Save your sales receipt in a safe place.

Record the serial number in the space provided on page 3, along with where and when you bought it.

THERMAL OL

SIGNAL

POWER

OUTPUTS

 

 

 

 

 

 

 

A

HIGH PASS

B

LEVEL

 

 

 

 

-6dB

+6dB

 

 

R

 

 

 

POLARITY

A

FULL RANGE

B

 

NORMAL

TH-18s

INVERT

 

ACTIVE SOUND

REINFORCEMENT SUBWOOFER

INPUTS

AB

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR

MOISTURE. DO NOT REMOVE COVER. NO USER SERVICEABLE

AVIS: RISQUE DE CHOC ELECTRIQUE — NE PAS OUVRIR PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.

SERIAL NUMBER

REVISION

POWER

ON

FUSE: T10AH AC250V

4