Daisy-chaining two subwoofers
TH-18s | | TH-18s | | |
Subwoofer 2 | | Subwoofer 1 | | |
| | | | Mixing Console |
| Full-Range | | | (Mackie ProFX12 shown) |
| | | |
TH-18s | Output | TH-18s | | 1 2 3 4 5/6 7/8 9/10 11/12 |
| | | From Mixer | MON MAIN |
| | | Output | |
The left and right line-level outputs from a mixer feed the left and right inputs of the first subwoofer. The inputs are summed in mono to play in the subwoofer, but this does not affect the full-range or high-pass outputs, which remain fully stereo. The left and right full-range line-level outputs of this subwoofer feed the left and right inputs of the second subwoofer. The high-pass outputs or full-range outputs of either subwoofer could feed the other powered loudspeakers in your system.
Lots ‘o Thump
Left Main
Powered
Loudspeaker
(Mackie SRM450v2
shown)
TH-18s
TH-18s Left
Subwoofer 2
TH-18s
TH-18s Left
Subwoofer 1
High-Pass
Outputs
Full-Range
Outputs
From Mixer | | | | | | | | | | | | | | | | | | | | From Mixer |
| | | | | | | | | | | | | | | | | | |
Left Output | | | | | | | | | | | | | | | | | | | | Right Output |
| | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | | | | | | |
Right Main
Powered
Loudspeaker
(Mackie SRM450v2
shown)
TH-18s
TH-18s Right
Subwoofer 2
TH-18s
TH-18s Right
Subwoofer 1
1 2 3 4
Mixing Console
(Mackie CFX12mkII shown)
The left and right line-level outputs from a mixer feed the inputs of a pair of subwoofers. Their respective full-range outputs feed the inputs of another pair of subwoofers. The high-pass outputs from the second set of subwoofers then feed the inputs of a pair of powered loudspeakers.
NOTE: It is highly recommended that you use straps to secure your loudspeakers for stacked scenarios such as this one. Be sure to loop a strap through each handle going down each side of the cabinet setup,
