Your Proceed dealer can help you take advantage of these design features to maximize your system’s versatility.
3AC MAINS FUSE
One fast-blow fuse is located on the rear panel of the BPA. If it should be- come necessary, replace the fuse with the same type only. Refer to the fol- lowing table for replacement values.
| BPA 2 | BPA 3 |
100V to 120VAC | 8 amp | 12 amp |
200V to 240VAC | 4 amp | 6 amp |
ALWAYS remove the AC cord before removing the fuse!
4SPEAKER BINDING POSTS
The Proceed BPA is equipped with gold-plated, high-current binding posts for output termination to a loudspeaker system. To take full advantage of the AMP’s sonic quality, we recommend using high-quality speaker cable; we suggest you see your Proceed dealer for specific recommendations.
NEVER connect the Proceed BPA output terminals to any device other than a loudspeaker.
NEVER short-circuit the amplifier’s output terminals.
NEVER connect the left-channel output terminals to the right- channel output terminals.
There are two recommended methods for connecting speaker cables to the Proceed BPA. A high-quality spade lug or hook lug, soldered to the cable (or crimped with extremely high pressure, or both) is best.
Connect the left-channel + (positive or red) output post of the Proceed BPA to the + (positive or red) input terminal of the appropriate loudspeaker.
Connect the left-channel – (negative or black) output post of the BPA to the
–(negative or black) input terminal of the appropriate loudspeaker. Repeat this procedure for the remaining channel(s).
