Madrigal Imaging N38 manual I M P O R T A N T, Standby Timer Time-outsin the Nº38

Standby Timer

Time-outs in the Nº38

I M P O R T A N T

In a similar fashion, the user of a Nº38 or Nº38S can elect to have the preamplifier (and the entire system, if Linked) go into standby after a certain period of time, much like a “Sleep Timer” on many alarm clocks. To engage the Standby Timer on the Nº38/S:

1.press and hold the standby button until the display reads TIME OFF.

2.turn the volume knob to select a time between 1 and 120 minutes. (Example: TIME 60 would turn off the system in an hour.)

3.the display will now time out and return to normal

4.the preamp (or Linked system) will go into standby at the appointed time one time only (so you don’t have to live with the product turning itself off every 60 minutes thereafter…).

Note: As a fail-safe against accidental changes (perhaps by smaller children, for example), changes made in various set-up modes are never made permanent without a second, confirming action on the users’ part, such as pressing and holding the Mode button a second time after a change is made. If a Set-up mode is entered accidentally, the Nº38 will time-out, or return to normal operation, after approximately ten seconds of inaction on the users’ part. No changes are made to the existing set-up when the Nº38 reverts to normal operation via a time-out.

25