Madrigal Imaging manual Tape, Substitute the word TUNER for PX-600 front panel operation

SYSTEM OPERATION

FM

▲ To skip to the next disc, press and hold the

CD button for about two seconds or until the

TAPE

▲To select the TAPE and issue a PLAY com- mand, momentarily press the TAPE button. The TAPE LED will illuminate.

▲To reverse the play direction of the tape, momentarily press the TAPE button again. Each subsequent press of the TAPE button will toggle the play direction.

▲Depending upon whether you have a single or multiple cassette player, the tape button press- and-hold function will operate differently:

Single Cassette Players

The press-and-hold function can be used for one of many other functions on the cassette deck depending on which IR function is programmed. Some examples of functions that may be used are: Automatic Music Search [AMS], Fast Forward, Rewind, Stop, etc. Ask your dealer how your system is set up.

Multiple Tape Player

If your tape player holds multiple tapes, the press- and-hold function may be used to advance to the next tape.

AUX

▲Ask your dealer what source, if any, is attached to the AUX input. If it is a second CD player or a tape deck, chances are it will work in the same way as the examples above.

▲If it is some other IR controlled component, your dealer will explain its operation from a keypad or IR remote control.

VID

▲To select the audio from your VIDEO source, momentarily press the VID button.

▲The RT-A remote control has the following but- tons dedicated to controlling VIDEO functions:

PLAY, STOP, FAST FORWARD, REWIND, CHANNEL s, CHANNEL t, PAUSE, TV/VCR. These functions are custom programmed for your specific needs by your dealer which may or may not match the labeling on the remote. Ask your dealer to explain the operation of these buttons for your particular system.

(Substitute the word TUNER for PX-600 front panel operation)

▲To select the TUNER, momentarily press the FM button. The FM LED will illuminate.

▲Once the tuner is selected, you can cycle through up to 9 tuner presets by repeatedly pressing the FM button.2

▲Press-and-hold the FM button for about two seconds or until the FM LED flashes to access an optional, additional command for the tuner (such as SEEK).

2The number of presets depends on the tuner in your system and the way your dealer has set it up.

CD

▲To select the CD and issue a PLAY command, momentarily press the CD button. The CD LED will illuminate.

▲The second and subsequent momentary presses of the CD button will send the SKIP TRACK command to the CD player.

CD LED flashes.

High-capacity CD changer operation

If your CD player is a high capacity changer (usually 100 or more discs), substitute this outline of functions:

CD button pressed first time:

This will select the CD changer and begin to play GROUP 1 or PLAYLIST 1.

CD button pressed second and subsequent times:

The PX-600 sends a SKIP TRACK command. The CD changer advances to the next track on the cur- rent CD or the next step in the group or playlist. There are some variables depending on how your particular CD changer works.

CD press-and-hold:

The PX-600 will advance to the next group or playlist. You can cycle through up to six playlists or groups.

7

4