Magellan MG-6160 manual X10 Programming, X10 Activation/Deactivation On Time

3.Select the desired House Code. Within this menu, you can perform any of the following options:

•Press the left [ACTION] key (ok) to select and save the present House Code. Pressing this key will also exit you from the House Code menu.

•Press the center [ACTION] key (next) to scroll through the available House Codes (from A to P).

•Press the right [ACTION] key (exit) to exit the screen and to return to the previous screen.

X10 Programming

Magellan offers a variety of programming choices for your X10 outputs (receivers). The X10 outputs can be programmed to follow a time schedule or a specific event. You can select all X-10 outputs to be affected at the same time or select specific X10 outputs to be affected.

X10 Activation/Deactivation On Time

This programming option configures the X10 outputs to activate or deactivate by following a daily time schedule. There are two time schedules that can be programmed. To configure the X10 outputs with this feature:

1.Access the X10 Setup menu (see “Accessing the X10 Setup Menu” on page 2).

2.Press the left [ACTION] key (ok) to program Magellan’s X10 On Time feature.

3.Press the left [ACTION] key (ok) to program the first time schedule.

4.Depending on the time format being used within the system (see the Magellan Reference and Installation Manual), enter the time you wish the first time schedule to take effect and then press the left [ACTION] key (ok) to save and continue.

12-hour clock format

24-hour clock format

5.Configure the X10 outputs you wish to activate or deactivate with the schedule and then press the right [ACTION] key (exit). See “Enabling/Disabling the X10 Outputs” on page 2 for more information.

6.Press the left [ACTION] key (ok) to program a second time schedule.

7.Depending on the time format being used within the system (see the Magellan Reference and Installation Manual), enter the time you wish the second time schedule to take effect and then press the left [ACTION] key (ok) to save and continue.

12-hour clock format

24-hour clock format

8.Configure the X10 outputs you wish to activate or deactivate with the schedule and then press the right [ACTION] key (exit). See “Enabling/Disabling the X10 Outputs” on page 2 for more information.

Magellan - X10 Operation User Guide 4