Trouble-Shooting Guide
. Sometimes you may come across minor problems | Ice Formation on the Inner Rear | |
that in most cases do not require a service call | ||
Wall | ||
and can be easily eliminated. The problem may | ||
| ||
have resulted from improper handling and / or | As long as the defrost water runs to the | |
installation of the appliance. Please refer to the | channel and through the outlet to the drain | |
below | pan on the compressor, automatic defrosting | |
identifying the possible cause and solution to your | of the appliance is assured. | |
problem. Should the problem still persist after | In case the ice formation on the inner back | |
completing these checkpoints, contact the closest | wall is increased |
authorized service agent in your area for assistance. manually defrosted.
Set the thermostat knob to STOP ( 0 ) position and leave the door open. Never use electric devices for defrosting and do not scrape the ice or frost layer with sharp objects.
After defrosting is complete, turn the knob to desired position and close the door. The cause of increased ice formation may be one of the following:
_ the door does not seal well (clean the gasket if it is contaminated, or replace it if
it is damaged);
_ the door is frequently opened or left too long;
_ the food stored in the appliance was warm; _ the food or dish is touching the inner back
wall.
8