NOTE
If the unit is unplugged or loses power; you must wait 3 to 5 minutes before restarting the unit. If you attempt to restart before this time delay, the refrigerator may not start.
Large amounts of food will lower the cooling efficiency of the appliance.
Do not place the foods on the air outlet, and leave spaces for airflow.
If you choose to change the thermostat setting, adjust thermostat control by one increment at a time. Allow several hours for temperature to stabilize between adjustments.
Changing the Light Bulb
Before removing the light bulb, turn off the refrigerator first. Then unplug the unit from the wall outlet. Failure to do so may result in electrical shock or personal injury.
1. Use a screwdriver to take out screw.
2. Remove the light cover by pulling downwards gently
3.Unscrew the bulb
4. Replace with a 15
5. Replace the light bulb cover and tighten screw.
Freezer Compartment Operation
Temperature Control
Your refrigerator has one control for regulating the
temperature in the freezer compartment. The temperature
control is located on the center of the freezer compartment's
interior back panel.
The first time you turn the unit on, adjust the temperature
control knob to "MAX" and run for at least 2 hours before
putting foods inside. This will ensure the cabinet is
thoroughly chilled before food is put in.
The range of the FREEZER temperature control is from
position "MIN" the warmest to "MAX" the coldest. Adjust the
temperature control to the setting that best suits your needs.
Freezer temperature |
Ice Tray
To make ice, pour cool water into ice tray and place it in the freezer for two hours. To release ice cubes, twist the ice tray and the ice cubes will separate from the ice tray. To shorten the time of making ice, you can set the temperature control knob at a colder position.
5
