9
AUTO DEFROST
AUTO DEFROST lets you easily defrost food by eliminating guess work in determining defrosting time.
Follow the steps below for easy defrosting.
The DEFROST indicator appears and “AUTO
DEFROST 1-GROUND MEAT 2-ROAST 3-
POULTRY 4-FISH SELECT NUMBER” is
displayed in sequence. “NUMBER” blinks three
times.
The displays are as follows and “LB” blinks
three times.
1. Touch AUTO DEF. pad.
2. Touch number pad for the
food you want to defrost.
AUTO
DEF.
3. Touch number pads for weight
within the proper range.
(Please refer to the above
“User Guide”)
4. Touch Start pad.
The selected weight appears and “PRESS
START” is displayed. “START” blinks three
times.
The chosen menu is displayed and the
DEFROST indicator starts blinking to show the
oven is in the defrost mode. Then the display is
changed into cooking time and counts down the
remaining time. When the defrosting time ends,
you will hear a beep.
NOTE: If you enter an incorrect weight out of
range, “RANGE ERROR PRESS
CLEAR” is displayed with a beep
sound.
Auto Defrost menu Display User Guide (When touching Help pad)
1. GROUND MEAT “GROUND MEAT -- ENTER WEIGHT IN LB” “WEIGHT RANGE 0.5 TO 3.0 LB”
2. ROAST “ROAST -- ENTER WEIGHT IN LB” “WEIGHT RANGE 2.0 TO 3.5 LB”
3. POULTRY “POULTRY -- ENTER WEIGHT IN LB” “WEIGHT RANGE 1.0 TO 3.0 LB”
4. FISH “FISH -- ENTER WEIGHT IN LB” “WEIGHT RANGE 0.5 TO 1.5 LB”
* AUTO DEFROST CHART
NOTE: 1. Any sensor cooking selection can be programmed with more or less time adjustment. In case of cooking more
food than the quantity listed in the chart, touch the POWER pad once after touching one of sensor cook menus
and before the oven beginning to start. In case of cooking less food, touch POWER pad twice.
2. If you touch POWER pad during operation, the display shows the present power level and then returns to the
chosen menu.
3. Each menu has a cooking hint. Touch Help pad before the oven starts operating and the display will show the
above mentioned user guides.
4. If “SENSOR PREHEAT ERROR1 PRESS CLEAR” is displayed with a beep sound while you choose the sensor
menu pad, turn off & on the oven and then try to use the oven again after 2 minutes. If there is still this error,
contact the qualified service man.
5. If “SENSOR PRESET ERROR3 PRESS CLEAR” is displayed with a beep sound during operation, turn off & on
the oven and then try to use the oven again after 2 minutes.