S p e c i a l F e a t u r e s
Using the Vent Fan
You can control the
Basic Instructions
1.Touch the VENT FAN Pad once for HIGH speed.
The Display will scroll “HIGH VENT FAN”.
2.Touch the VENT FAN Pad twice for LOW speed.
The Display will scroll “LOW VENT FAN”.
3.Touch the VENT FAN Pad three times for turning vent fan off.
The Display will scroll “OFF VENT FAN”.
To Set Fan to Run for a Specific Time:
1.Start fan by touching the VENT FAN Pad.
2.Program run time.
◆Touch the TIMER Pad and hold for 3 seconds. Display will show “FAN”.
3.Enter desired time.
4.Touch the START Pad.
To Cancel Timer:
◆Touch CANCEL/OFF Pad twice.
Using the Cooktop Light
You can control the cooktop light by touching the LIGHT Pad.
Basic Instructions
1.Touch the LIGHT Pad once for turning the cooktop light on.
The Display will scroll “ON LIGHT”.
2.Touch the LIGHT Pad twice for turning the night light on.
The Display will scroll “NIGHT LIGHT”.
3.Touch the LIGHT Pad three times for turning the cooktop light or night light off. The Display will scroll “OFF LIGHT”.
To Set Light to be on for a Specific Time:
1.Turn on light by touching the LIGHT Pad.
2.Program “ON” time.
◆Touch the TIMER Pad and hold for 3 seconds. Display will show “LIGHT”.
3.Enter desired time.
4.Touch the START Pad.
To Cancel Timer:
◆Touch CANCEL/OFF Pad twice.
Note . . .
◆If the temperature gets too hot around the microwave oven, the exhaust fan in the vent hood will automatically turn on the Low setting to protect the oven. It may stay on up to an hour to cool the oven. When this occurs, the Fan Off Pad will not turn the fan off.
◆If both the fan and light are operating and the TIMER Pad is touched and held, both the fan and light will be controlled by the timer. The Display will alternate between “FAN” and “LIGHT” one time.
◆Canceling the timer will cause the timer to shut off; however, canceling the timer will not cancel the fan. The fan will continue to operate until turned off.
17
Note . . .
◆If both the fan and light are operating and the TIMER Pad is touched and held, both the fan and light will be controlled by the timer. The Display will alternate between “FAN” and “LIGHT” one time.
◆Canceling the timer will cause the timer to shut off; however, canceling the timer will not cancel the light. The light will continue to operate until turned off.
